Jak 3 (ArchipelaGOAL 3) Setup Guide

Required Software

• A legally purchased copy of Jak 3.
• The OpenGOAL Launcher.

Installation via OpenGOAL Launcher

You must set up a vanilla installation of Jak 3 before you can install mods for it. These instructions will work on both NTSC and PAL versions of the game.

• Follow the installation process for the OpenGOAL Launcher, found here.
• Follow the setup process for adding mods to the OpenGOAL Launcher, found here.
• Run the OpenGOAL Launcher. If you have it open already, close and reopen it.
• Click the Jak 3 logo on the left sidebar.
• Click Features in the bottom right corner, and then click Mods.
• Under Available Mods, click ArchipelaGOAL 3. The mod should begin installing. When it is done, click Continue in the bottom right corner.
• DO NOT PLAY AN ARCHIPELAGO GAME THROUGH THE OPENGOAL LAUNCHER. The Archipelago Client should handle everything for you.
• Once the mod is installed, in the bottom right corner, click Advanced, then Compile.

Updates and New Releases via the OpenGOAL Launcher

If you are in the middle of an async game, and you do not want to update the mod, you do not need to do this step. The mod will only update when you tell it to.

• Run the OpenGOAL Launcher. If you have it open already, close it and reopen it.
• Click the Jak 3 logo on the left sidebar.
• Click Features in the bottom right corner, then click Mods, then under Installed Mods, click ArchipelaGOAL II.
• Click Update to download and install any new versions that have been released.
• You can verify your version by clicking Versions. The version you're using will say (Active) next to it.
• Now, you must click Advanced, then Compile, in order for the update to take effect.

Starting a Game

New Game

• Run the Archipelago Launcher.
• From the list, locate and select Jak 3 Client.
• From there, three windows should appear:
  • The OpenGOAL compiler will compile and launch the game. They should take about 30 seconds to compile.
    • You can MINIMIZE the Compiler window, but DO NOT CLOSE IT!! It is required for Archipelago and the game to communicate with each other.
  • The game window itself will launch, and Jak will be standing in Spargus.
    • Once the compilation is complete, the title sequence will start.
  • Finally, the Archipelago text client will open.
    • If you see BOTH The Compiler is ready! and The Memory Reader is ready!, then that should indicate a successful startup. If you don't, please see the troubleshooting section.
• Once you see the game's title screen, use the text client to connect to the Archipelago server. This will communicate your current settings and slot data to the game.
• Please give the game a moment to receive your items, if applicable. It can take anywhere from a few seconds to a couple of minutes, so please be patient.
• After waiting, you can press Start.
• Choose New Game, choose a save file, and play through the opening cutscenes.
• Once you reach the Arena, the game has begun!

Returning / Async Game

The same steps as starting a New Game apply, with some key exceptions:

• Once you reach the title screen, connect to the Archipelago server BEFORE you load your save file.
  • This is to allow AP to give your current settings and all the items you had previously.
  • THESE SETTINGS AFFECT LOADING AND SAVING OF SAVE FILES, SO IT IS IMPERATIVE THAT YOU DO THIS FIRST.
• After a given amount of time has passed on the title screen, you can press Start.
• Instead of choosing New Game in the title menu, choose Load Game and choose the save file for this respective game.

Troubleshooting

The Text Client says "Unable to locate the OpenGOAL install directory"

Normally, the Archipelago client should be able to find your OpenGOAL installation automatically.

However, if it can't, you may have to tell it yourself. Do the following:

• Run the OpenGOAL Launcher. If you have it open, close it and re-open it.
• Click the Jak 3 logo on the left sidebar.
• Click Features in the bottom right corner, then click Mods, then under Installed Mods, click ArchipelaGOAL 3.
• Click Advanced in the bottom right corner, then click Open Game Data Folder. You should see a new File Explorer open to that directory.
• In the File Explorer, go to the parent directory called archipelagoal-3, and you should see gk and goalc executables. Copy this path.
• Run the Archipelago Launcher, then locate and click on Open host.yaml. You should see a new text editor open that file.
• Search for jak3_options, and you will need to make two changes here.
• First, find the root_directory entry. Paste the path you noted earlier (the one with gk.exe and goalc.exe) inside the double quotes.
• MAKE SURE YOU CHANGE ALL BACKSLASHES \ TO FORWARD SLASHES /!!

root_directory: "%programfiles%/OpenGOAL/features/jak3/mods/archipelagoal/archipelagoal"

• Second, find the auto_root_directory entry. Change this field to false. You do not need to use double quotes.

auto_root_directory: true

• Save the file and close it.

The Game Fails to Load the Title Screen

You may start the game via the Text Client, but it never loads in the title screen. Check the Compiler window: you may see red and yellow errors like this.

-- Compilation Error! --

If this happens, follow these instructions

• Run the OpenGOAL Launcher. If you have it open, close it and re-open it.
• Click the Jak 3 logo on the left sidebar, then click Advanced, then click Open Game Data Folder. Copy the iso_data folder from this directory.
• Back in the OpenGOAL Launcher, click the Jak 3 logo in the left sidebar.
• Click Features in the bottom right corner, then click Mods, then under Installed Mods, click ArchipelaGOAL 3.
• In the bottom right corner, click Advanced, then click Open Game Data Folder.
• Paste the iso_data folder you copied earlier.
• Back in the OpenGOAL Launcher, click on the Jak 3 logo on the left sidebar.
• Click Features in the bottom right corner, then click Mods, then under Installed Mods, click ArchipelaGOAL 3.
• In the bottom right corner, click Advanced, then Compile.

The Text Client Says "Error reading game memory!" or "Error sending data to compiler!"

If at any point the text client says this in big red letters, you will need to restart the all of these applications.

• Close all open windows: the client, the compiler, and the game.
• Run the OpenGOAL Launcher, then click Features, then click Mods, then click ArchipelaGOAL 3.
• Click Advanced, then click Play in Debug Mode.
• Click Advanced, then click Open REPL.
• Then close and reopen the Jak 3 Client from the Archipelago Launcher.
• Once these are done, you can enter /repl status and /memr status in the text client to verify.

The Client Cannot Open A Compiler Connection

If the client cannot open a REPL (compiler) connection to the game, you may need to check the following steps:

• Ensure you are not hosting anything on ports 8181 and 8112. Those are for the REPL (goalc) and the game (gk) respectively.
• Ensure that Windows Defender and Windows Firewall are not blocking those programs from hosting or listening on those ports.
• You can use Windows Resource Monitor to verify those ports are open when the programs are running.
• Ensure that you only opened those ports for your local network, not the wider internet.

Known Issues

• Some missions require you to restart the mission in order to truly start.